Hi guys, i have an idea, this is a Colour Coded Blocks command, means if you want to fill your floor or wall, do this commands :
/setfloor *coordinate* *block* *blockID*
or
/fill *1st coordinate* *2nd coordinate* *block* *blockID*
for example :
/setfloor 23 65 78 wool 2
wool and code 2 means it is
Magenta
and
/fill 28 68 -19 72 71 -2 concrete 5
concrete and code 5 means it is Lime
Codes list for coloured blocks :
0 = White
1 = Orange
2 = Magenta
3 = Light Blue
4 = Yellow
5 = Lime
6 = Pink
7 = Grey
8 = Light Grey
9 = Cyan
10 = Purple
11 = Blue
12 = Brown
13 = Green
14 = Red
15 = Black
These Codes can be use for /setblock or /fill command.
These blocks are only available to use thats codes :
Concrete
ConcretePowder
Stained_Glass
Stained_Hardened_Clay
Wool
Look At This Picture :
View attachment 211961
1,3,5,7,9,11,13,15 (
Left)
2,4,6,8,10,12,14 (
Right)
For stones,
for example : /fill 26 78 38 83 78 -12 stone 2 , stone and code 2 means its
Polished Granite
Codes list (For stones only!)
0 = Stone
1 = Granite
2 = Polished Granite
3 = Diorite
4 = Polished Diorite
5 = Andesite
6 = Polished Andesite
These codes its use for only slabs, or stone blocks!
For Woods, and logs!
example :
/setblock 82 67 37 wood 3
the wood and code 3 means it is a Jungle wood (Bark wood or full wood)
/fill 27 48 -78 log2 1
the log2 and code 1 means it is a Dark Oak Log
Codes for Woods (Bark Woods)
0 = Oak Wood
1 = Spruce Wood
2 = Birch Wood
3 = Jungle Wood
4 = Acacia Wood
5 = Dark Oak Wood
For Log (Logs)
0 = Oak Log
1 = Spruce Log
2 = Birch Log
3 = Jungle Log
For Log2
0 = Acacia Log
1 = Dark Oak Log
These Codes is for only Woods/Logs!
Have a nice day!!
and good luck for making a Map!
